Dotpeenator PR100 Pneumatic Rotary Axis is integrated to all our dot peen marking machines and used for marking circumferential parts. It operates gripping work pieces when the start button is pressed and releasing the part at the end of marking operation
"A Dotpeenator™ PR100 Pneumatic Rotary Axis" is integrated into any dot peen marking machine within the series of dot peen marking machines. Each of our dot peen marking machines has a 9 pin serial port for connection and communication with a PR100 pneumatic rotary axis. The chuck of a PR100 has the capacity of gripping the pipes up to 100 mm in diameter or any circular parts underneath the marking heads. As an option, there is also a tail stock or a V-shaped holder to secure the long work pieces at the other end. A PR100 comes with a communication and power cable with two metal connectors at both ends. The PR100 models can be easily integrated into the work table through the T slots and securing T bolts. This rotary axis is turned on by a power switch and operated by the help of Dotpeenator Marking Software Packages. The operation of the PR100 pneumatic rotary axis is simultaneous with the other axes of the marking heads.